Loading...
Continuous oven bellow 600˚2019-01-16T02:07:17+02:00

Continuous oven for paint finishing and baking

“The ideal combination of infrared heaters and ventilation systems with burners for a quality paint finishing and baking.”

The oven is intended for colour curing after powder coating.

The dyed pieces travel through the oven, which is in fact a heating tunnel.

Transport takes place with the help of a chain transporter on the oven ceiling outside of the heated area.

Heating is done through a combination of infrared heaters that heat the surface quickly, as well as ventilation systems quipped with channel burners.

Infrared heaters are placed throughout the oven interchangeably and also heat the side of the channel in the interim between two pieces. As a result, the outside surfaces are heated quickly as well.

This method of curing/paint finishing is suitable for product with a large exterior surface

The products then travel along the other part of the oven where the paint finishing process end with the help of convection – with the help of the heated air circulating through the dryer, the infrared channel burner heats the air.

0m
Furnace length
0mm
Channel width
Ovens to be heated bellow 600˚C
Chamber oven bellow 600˚C
Continuous oven bellow 600˚C
Ovens to be heated above 1000˚C

Continuous oven for paint finishing and baking

“The ideal combination of infrared heaters and ventilation systems with burners for a quality paint finishing and baking.”

The oven is intended for colour curing after powder coating.

The dyed pieces travel through the oven, which is in fact a heating tunnel.

Transport takes place with the help of a chain transporter on the oven ceiling outside of the heated area.

Heating is done through a combination of infrared heaters that heat the surface quickly, as well as ventilation systems quipped with channel burners.

Infrared heaters are placed throughout the oven interchangeably and also heat the side of the channel in the interim between two pieces. As a result, the outside surfaces are heated quickly as well.

This method of curing/paint finishing is suitable for product with a large exterior surface

The products then travel along the other part of the oven where the paint finishing process end with the help of convection – with the help of the heated air circulating through the dryer, the infrared channel burner heats the air.

0m
Furnace length
0mm
Channel width
Ovens to be heated bellow 600˚C
Chamber oven bellow 600˚C
Continuous oven bellow 600˚C
Ovens to be heated above 1000˚C

Procesni
inženiring
d.o.o.

Plin v
Industriji z intenzivno energetsko usmeritvijo.

T +386 (0)1 7220 900
E procesni@siol.net
W www.procesni.si

Prijava na novice

Z izpolnjenim spletnim obrazcem soglašate s prejemanjem naših spletnih obvestil in novosti o svetu inženirstva
NAROČI
S klikom potrjujem, da lahko podjetje Procesni Inženiring d.o.o. shrani in obdela vnesene podatke.
close-link
By continuing to browse this site you are agreeing to our use of cookies, to ensure you get the best experience on our website; Do you want to find out more? Ok